Code Retard

Neur0n has released Custom Firmware 6.60 LCFW / CFW version 1.3  builds. The Lite verions is for non flashable PSP like the PSP-3000 and PSP Go series. All original fat and slim models (PSP-1000 and PSP-2000 Not TA0v88v3) go with the Custom Firmware 6.60 ME 1.3 non lite build. Thats a perm firmware for your flashable system.

LCFW / Custom Firmware 6.60 ME 1.3 Changelog:

v1.3

• Added Backup/Restore Netconfig option in Recovery menu.
• Fixed a bug when Use VshMenu while using RemotePlay, Skype, 1seg and PSN-store.

Source: Neur0n

For Further Reading:

br br

Tags

Similar Posts

Search Terms

Tags:

Davee uploaded online Downgrader that enables you to downgrade a 9g to 6.20 OFW. Until now 9g was able to downgrade only to OFW above 6.30. How is that possible?

After examining the 4g and 9g modules Davee found out that they have almost no difference. So he was able to find what exacly has changed and to patch it up in order to make the 9g downgrader that support 6.20.

The downgrader, however, is tested only on few PSPs so it’s still kind of dangerous operation and we are not responsible for possible brick. It was reported that 6.20 PRO B9 with permanent patch works just fine and the only thing that is not OK is that PRO B9 thinks the PSP is 4g. This is update of some1?s  Downgrader v4.1 but if you are not with 9g or not downgrading to 6.20 I’ll recommend to use v4.1 instead.

So how to install :

• Add both “Downgrade v5? and “UPDATE” folders to PSP/GAME
• Run the Downgrader from Game-Memory Stick
• Follow the instructions on the screen.
• After the install a blue screen will appear. Press O to restore your settings.(If a white screen splashes instead of the blue one turn off your PSP completely and turn it on again then as fast as you can hit the following combination of buttons : Select+Start+Square+Triangle )

Source : [Davee's blog]

Download Downgrader v5 (Outside link)

For Further Reading:

br br

Tags

Similar Posts

Search Terms

Tags:

Some1 posted online his latest and long awaited downgrader for 6.60 OFW. It’s compatible with all PSP models. You can downgrade from 6.60/6.39/6.38/6.35/6.31 to any OFW compatible with your motherboard  nevertheless Some1 advises us not to use below 5.00 as it hasn’t been tested. You will find the motherboard compatible FW below. It’s a risky operation and we are not responsible if something happens to you console. The downgrader uses new kernel fault found by Davee.

Changelog:

v4.0:

• Added Support for 6.60
• Fixed 6.60 problem that didn’t allow to downgrade to anything greater than 6.20, thanks to Davee
• Allows any updater that is greater than or equal to the factory installed OFW (Has not been fully tested, will most likely work on 5.00 and up)
• Special Sauce added by Proxima

v4.1:

How to install :

• How to install it  : Place the “6.xx Downgrader V4.1? from the downgrader’s archive folder  in PSP/GAME. Add the update of the OFW to want ( EBOOT.PBP )  to PSP/GAME/UPDATE ( with capitals ).
• How to use : Run it from Game – Memory Stick and follow the instructions on the screen to downgrade ( you need 75% battery or you will be kicked off the program ). Probably around 85-90 % you will get an error -don’t worry it’s normal. When boot after the install you ‘ll see a blue screen asking you to hit O. Do it. If instead of blue screen got blank on fresh boot press the following : SELECT+START+Square + Triangle.

List of motherboards and the OFW they support :

1. 1g -Any
2. 2g with flashable motherboard -Above 3.60 ( You can not distinguish this from the next without a cfw so I’ll advise you to not flash 2g below 4.01 )
3. 2g with unflashable motheboard -Above 4.01
4. 3g -Above 4.20
5. 4g -Above 5.70
6. 5g -Above 5.70
7.  7g/9g -Above 6.30

How to find your motherboard type : Download PSP Module checker 1. 0 and place the folder “PSPModuleChecker1.0? rared in it in PSP/GAME then run it on your PSP from Game – Memory stick. See what’s written.

PSP Module Checker 1.0

Some1?s 6.XX Downgrader V4.1

For Further Reading:

br br

Tags

Similar Posts

Search Terms

6 xx Downgrader v4, how to use 6 XX downgrader v4, psp downgrader v4, how to install 6 60 downgrader, 6 60 downgrader 4 1, 6 60 ofw downgrader, downgrader 6 60 6 39 pro b6, how to use 6 xx downgrader, Some1 posted online his latest and long awaited downgrader, PSP DOWNGRADER FOR 6 60,

Tags:

Remember 6.20 TN-E? Remember its menu? Do you regret upgrading to CFW because of it? No need to worry anymore as XMBCtrl is now updated to version 1.2beta to support the 6.60 CFWs released last week. Let’s see what else has changed in this new version :
(v1.2)
[+] Added ME Freecore xmbctrl.
[!] Visual fixes.
[!] Fixed crashing on PSPgo (ME).

To clear the possible misunderstandings let’s answer some of the most common questions on the topic :

• What is XMBCtrl? This is a plugin that lets you to change the most common settings from the PSP menu instead from the vsh or recovery.
• What firmware are supported? All 6.xx PRO B9 as well as latest 6.60/6.39 ME.
• What PSP Models are supported? All PSP models are supported.
• I am using 6.60 CFW and the program doesn’t boot up.What should I do? Install Sense Me application and it will boot just fine.

How to install?

• Download the archive below.
• Unrar and copy the “XMBCtrl” folder to PSP/GAME. Copy all text files included in the archive in the root of your memory stick/internal memory.
• Run the program from Game – Memory Stick.
• ” Choose Install XMB Control [ME] ”  if you are on ME CFW or ” Choose Install XMB Control [PRO] “ if you are on PRO CFW.
• The PSP will reboot and the plugin will be enabled.

How to use ?

• Go to Settings – PRO Settings
• Change your settings as you want.

Source : [wololo's forums]

Download XMBCtrl 1.2beta

For Further Reading:

br br

Tags

Similar Posts

Search Terms

Tags:

Popsdeco updated his poploader, which is now compatible with 6.60 PRO B9 and 6.60 ME. Despite the problems reported on PRO’s official popsloader this one seems to work fine. Here is the full changelog :

v4d (24.08.2011) :

• Forgot to close EBOOT file handle when get_disc_id() failed.
• Integrated http://code.google.com/p/popsloader/source 54abc82880ed.
• Now more stable.
• Actually some of NID wasn’t resolved for 6.60.

v4e (27.08.2011) :

• Recompiled all modules using -O2.
• Suspend recover bug fixed for 3.7x if you use PRO

Before installation let’s clear all possible questions :

• What is popsloader? Popsloader is a plugin that enables you to use PS1 emulator from older firmware version.
• Why do I need to use one? Sometimes the newer firmwares do not support some PS1 games that can be used on older ones so if you have some problems with some PS1 games this might be the solution.
• What PSPs are supported ? All PSP models are supported.
• What firmwares are supported ? 6.20/6.35/6.39/6.60 PRO B9 and latest 6.60/6.39 ME .
• Where to find the pops I need for my game? Click here.

How to install (I have included all POPS versions as you don’t need to.):

• Copy the popsloader folder into the SEPLUGINS folder. If you don’t have one please create new folder in the root of the PSP and name it SEPLUGINS.
• Open the POPS.txt. If you don’t have any create new text document in the SEPLUGINS folder and name it POPS.
• Add the following line in it if you have placed the files in the memory stick  ”ms0: / seplugins / popsloader / popsloader.prx 1” or “ef0: / seplugins / popsloader / popsloader.prx 1” if it’s in the internal memory of PSP GO. Don’t forget to check if POPS.txt has a blank line at the end – if no add one.
• Hit the select button on your PSP and choose “Reset VSH” option.

How to use :

• Run the PS1 game converted for PSP.
• Hit the R button as soon as you see the PSX gameboot
• Choose the POPS you want

Source : [wololo's forums]

For Further Reading:

br br

Tags

Similar Posts

Search Terms

Tags:

Pro team launched an official update of popsloader, which is now compatible with 6.60 PRO B9. Here is the full changelog :

• Compatible with Light Custom Firmware 6.60 PRO
• Support POPS the firmware 6.60
• Fixed some bugs

Before installation let’s clear all possible questions :

• What is popsloader? Popsloader is a plugin that enables you to use PS1 emulator from older firmware version.
• Why do I need to use one? Sometimes the newer firmwares do not support some PS1 games that can be used on older ones so if you have some problems with some PS1 games this might be the solution.
• What PSPs are supported ? All PSP models are supported.
• What firmwares are supported ? 6.20/6.35/6.39/6.60 PRO B9.
• Where to find the pops I need for my game? Click here.

How to install (I have included all POPS versions as you don’t need to.):

• Copy the popsloader folder into the SEPLUGINS folder. If you don’t have one please create new folder in the root of the PSP and name it SEPLUGINS.
• Open the POPS.txt. If you don’t have any create new text document in the SEPLUGINS folder and name it POPS.
• Add the following line in it if you have placed the files in the memory stick  ”ms0: / seplugins / popsloader / popsloader.prx 1” or “ef0: / seplugins / popsloader / popsloader.prx 1” if it’s in the internal memory of PSP GO. Don’t forget to check if POPS.txt has a blank line at the end – if no add one.
• Hit the select button on your PSP and choose “Reset VSH” option.

How to use :

• Run the PS1 game converted for PSP.
• Hit the R button as soon as you see the PSX gameboot
• Choose the POPS you want

Source : [PRO CFW Official Page]

For Further Reading:

br br

Tags

Similar Posts

Search Terms

complete PopsLoader for fw 6 60, 6 35 b9 popsloader, POPSLoader V3 Officiel, POPSLoader v3, Popsloader for 6 60 v3, popsloader for 6 20 pro-b9, popsloader 6 60 pro, pops txt psp go, 6 60 pro-b9 changelog, psx on psp 6 60 b9 tutorial,

Tags:

The Pro Team ( Virtuous Flame , Coldbird , Neur0n and npt ) released new revision of their LCFW that is now labeled B9. Here are some the most frequently asked questions about their LCFW:  

• What is LCFW ? LCFW a.k.a Light Custom Firmware is a custom firmware that is stored in the RAM and when the PSP is completely turned off it gets erased. It’s the only CFW available for PSP 3000/GO/E1000 and PSP 2000 with TA088v3. It enables you to play PS1 games, PSP iso/cso games and to run homebrews and plugins.
• Is there a way to make this LCFW permanent? If your PSP supports 6.20 OFW there is so called Permanent Patch that can make the 6.20 Pro b9 permanent and it’s supported by any PSP that supports 6.20 OFW. If you have PSP 1000 or PSP 2000 with non-TA088v3 motherboard you can also install 6.39 Pro B9 or 6.60 Pro B9 and install CIPL. This will make the LCFW full CFW.
• What is Fast Recovery? After the initial installation of the LCFW there is easier way to turn it on. It’s to run the Fast Recovery.
• Can I delete the files after the installation? If you have installed 6.20 Pro B9 with a permanent patch  or CIPL you can delete everything. If not than you can delete everything except the Fast Recovery.
• What PSPs are supported?

1. 6.20 Pro B9 – 1g,2g,3g,4g,5g,6g
2. 6.35 Pro B9 – 1g,2g,3g,4g,5g,6g,7g,9g
3. 6.39 Pro B9 – 1g,2g,3g,4g,5g,6g,7g,9g
4. 6.60 Pro B9 - 1g,2g,3g,4g,5g,6g,7g,9g,11g a.k.a PSP E1000( not yet tested )

• I installed 6.20 Permanent Patch and got a file called vshorig.prx. What to do it? This is file that will help you if something with your PSP went wrong. Copy it somewhere save – on your computer for example.

So How to install 6.XX Pro B9:

• Install the some of these OFW : 6.20,6.35,6.39,6.60 ( No matter if you downgrade or upgrade or you are on one of them already )
• Download the version of the LCFW that corresponds to your OFW
• Unrar both FastRecovery and PROUPDATE folders in PSP/GAME
• Run the 6.XX PRO UPDATE Icon from Game – Memory Stick
  
• You will see black screen like the one below. Hit the X button. When the installation completes hit the X button again.
  
  
  
• You are now back to the menu with 6.XX Pro B9 installed.

How to install 6.20 Permanent Patch( This works only on 6.20 Pro B9 already installed and enabled) :

• In the 6.20 Pro B9 archive you will find folder called “620PRO_Permanent”. Copy it in PSP/GAME
• Run it from Game – Memory Stick on your PSP.( See below )
  
  

• You will see a black screen. Press X on it. Then you will be asked if you want to test the patch. Press X again. ( See below )

• If your PSP doesn’t crash and goes to the XMB you can proceed with the installation. Otherwise your PSP is not compatible with it and should stop trying to install it.
• Run the permanent patch again. Hit X again on the first question but this time hit O on the second.
• Your 6.20 Pro B9 is now permanent. You Will find out that you got a file vshorig.prx in your root directory of the PSP. Copy it somewhere save – for example on your computer. It can help in some cases of brick.

Installing 6.39/6.60 CIPL( This must be installed on 6.39/6.60 Pro B9 and only on PSP 1000 and PSP 2000 with non -TA088v3 motherboard. Otherwise this will cause a brick that can not be fixed.) :

• You will find a  CIPL_Flasher folder in the 6.39/6.60 Pro B9 archives. Place it in PSP/GAME
• Run it from Game – Memory Stick ( See Below ).

•  You will see a black screen as the one below. Hit X and wait the psp to reboot.

• You now have a permanent 6.39/6.60 PRO B9.

Last but not least here is the changelog :

• Some bugfixes and code optimization
• Support for PSP Go Video mount
• Fixed a bug in Inferno/SonyNP9660 when enter sleep mode
• Updated decryption component, 6.20/6.3x add future support for encryption type PRX version 6.60
• Added compatibility to future game requiring 6.60fw
• Added 6.60 version (theorically sopports 11g module)
• Added option 166/83 frequency of CPU

Source : [PRO CFW Official Site]

Download 6.20 Pro B9

Download 6.35 Pro B9

Download 6.39 Pro B9

Download 6.60 Pro B9

For Further Reading:

br br

Tags

Similar Posts

Search Terms

Tags:

Some1 posted online his latest and long awaited downgrader for 6.60 OFW. It’s compatible with all PSP models. You can downgrade from 6.60/6.39/6.38/6.35/6.31 to any OFW compatible with your motherboard  nevertheless Some1 advises us not to use below 5.00 as it hasn’t been tested. You will find the motherboard compatible FW below. It’s a risky operation and we are not responsible if something happens to you console. The downgrader uses new kernel fault found by Davee.

Changelog:

• Added Support for 6.60
• Fixed 6.60 problem that didn’t allow to downgrade to anything greater than 6.20, thanks to Davee
• Allows any updater that is greater than or equal to the factory installed OFW (Has not been fully tested, will most likely work on 5.00 and up)
• Special Sauce added by Proxima

How to install :

• How to install it  : Place the “6.xx Downgrader V4? from the downgrader’s archive folder  in PSP/GAME. Add the update of the OFW to want ( EBOOT.PBP )  to PSP/GAME/UPDATE ( with capitals ).
• How to use : Run it from Game – Memory Stick and follow the instructions on the screen to downgrade ( you need 75% battery or you will be kicked off the program ). Probably around 85-90 % you will get an error -don’t worry it’s normal. When boot after the install you ‘ll see a blue screen asking you to hit O. Do it. If instead of blue screen got blank on fresh boot press the following : SELECT+START+Square + Triangle.

List of motherboards and the OFW they support :

1. 1g -Any
2. 2g with flashable motherboard -Above 3.60 ( You can not distinguish this from the next without a cfw so I’ll advise you to not flash 2g below 4.01 )
3. 2g with unflashable motheboard -Above 4.01
4. 3g -Above 4.20
5. 4g -Above 5.70
6.  7g/9g -Above 6.30

How to find your motherboard type : Download PSP Module checker 1. 0 and place the folder “PSPModuleChecker1.0? rared in it in PSP/GAME then run it on your PSP from Game – Memory stick. See what’s written.

PSP Module Checker 1.0

Some1?s 6.XX Downgrader V4

For Further Reading:

br br

Tags

Similar Posts

Search Terms

6 xx Downgrader v4, how to use xx downgrader v4, 6 60 downgrader pc version, psp downgrader v4, psp downgrader the fame could not be started, download 6 XX downgrade(by Some1) Version:4, Downgrader v4 download, downgrade version from 6 60 to 6 xx, dowgrade 6 60 1g, 6 XX Downgrader v4 problem,

Tags:

• What is HBL ? HBL is a signed homebrew that allows users to run other unsigned homebrews on Official Firmware  like some homebrew apps, some homebrew games and some emulators. It CAN NOT launch isos and csos or plugins.
• How to install ? Unzip the archive in the root of the PSP’s memory stick or or internal memory.
• How to use it ? Put your homebrews in PSP/GAME and launch HBL from Game- Memory Stick. Choose the homebrew you want to launch.
• What’s new ? No official changelog was given but as far as i understood it has improved loading times compared to R116.

Source : [Wololo]

For Further Reading:

br br

Tags

Similar Posts

Search Terms

how to install r118 to psp, Half Byte Loader (HBL) R116 for Firmware 6 60 download, psp 6 60 hbl monster hunter 3, how to use hbl r118 for OFW 6 60, how to use hbl r118, how to use half byte loader r 118, Half Byte Loader (HBL) R116, hbl r118, hbl agosto 2011, HBL 118 games,

Tags:

E1000 or how is now called by PSPGen PSP Cheap was announced at GamesCom a few days ago . The console was playable for the show so few guys that call themselves hackers go and tried running a signed homebrew on it. It ran in no time. Additionally we find out that the console runs 6.50 OFW.

Here is the video :

Source : [PSPGEN]

For Further Reading:

br br

Tags

Similar Posts

Search Terms

Tags: