How to Jailbreak iPhone v2.1 Firmware with QuickPWN 2.1 (Windows)
/* Posted September 19th, 2008 at 1:19pm *//* Filed under Apple, How-To, iPhone */
/* */
The moment every Windows user has been waiting for: QuickPwn 2.1 GUI has just been released for iPhone users wishing to upgrade their phones to the latest v2.1 firmware without having to jump through hoops and hurdles. We posted earlier ways to upgrade to 2.1 on Windows but this didn’t work for some people with 1600, 6, and 1400 errors or else left the iPhone boot screen blank. Now, however, all these problems should be resolved, we hope.
- Download QuickPwn 2.1 GUI version and extract the zip (there is no need to install). Additional mirrors available here, here or here.
- Grab the matching 2G or 3G restore firmware ipsw from Apple corresponding to your iPhone.
- Optional step to backup jailbroken apps: Install AptBackup which can be downloaded from Cydia. It will move your third party app data to a partition of memory on your iPhone to where iTunes will see it and will subsequently back it up during an iTunes backup sync. After a system restore and you get Cydia back, install AptBackup again and use it to restore your app data. It’s not 100% perfect but at least it won’t leave you starting from scratch.
- Upgrade to iTunes 8 (or download it directly and install it).
- Connect your iPhone to your PC via USB cable.
- Allow iTunes to upgrade your iPhone firmware to v2.1.
- After the iPhone is upgraded, launch QuickPwn.
- Click next after verifying your iPhone is connected via USB.
- QuickPwn 2.1 is able to automatically detect your device (2G, 3G, or iPod) for you.
- Browse to the 2G or 3G restore firmware ipsw file you downloaded in step 2. After the green checkmark appears, click the arrow button.
- On the next page, make sure you select the “Cydia” checkbox. You can check “Installer” and replace logo as desired. If you have a 2G iPhone and wish to unlock it, also make sure to check the “Unlock phone” option as well. Click the arrow button after making your selections.
- If you opted to unlock, you’ll need to download the 3.9 and 4.6 bootloader binaries. Browse to these in QuickPwn to load them. If you didn’t, you won’t get this screen so you can skip to the next step.
- Now click on the Go button which will bring up a screen with some instructions. Follow them exactly to a tee. Just to prepare, here are the directions: 1) Hold Home for 5 seconds, 2) Hold Home and Power together for 10 seconds, 3) Release Power but continue to hold Home for 30 seconds
- Then sit back and relax while QuickPwn does all the hard work for you, you’ll see some activity on your iPhone screen, but when it restarts finally, it’s ready to use.
- Bonus step to restore jailbroken apps: Install AptBackup again from Cydia and this time execute the restore function to bring back all your old apps.
Related Posts
Related Videos
 |
 |
 |
 |
| iPod Touch/iPhone 2.1… | Ipod touch/Iphone 2.1… | JAILBREAKK AN IPHONE OR… | How to Jailbreak Ipod… |
Related Stories
DevTeam releases PwnageTool and QuickPwn 2.1
http://www.coderetard.com
(Apple) With firmware 2.1 now out for the iPhone and iPod touch we bring you the inevitable PwnageTool and QuickPwn response. Apparently, the DevTeam took offense to a previous posting where we questioned the relevancy of continued jailbreaks in the age of the AppStore and official, worldwide iPhone distribution. Come on guys, can't we all just along?Dugg 649 times
Subscribe via email
on 
on 
on 
on 
on 
Awesome! We’ve waiting for it. Hope to try it soon on the phones…
Thanks, I ‘ll try to upgrade to 2.1.
Is is possible to get my apps back after upgrading?
Use AptBackup which you can install from Cydia to backup your jailbroken apps.
It works great!
Totaly aproved!
Yep, it works perfectly fine …infact gr8!
Also, I was able to get my cydea apps back using aptbackup, thanks adm_snackbar..
The only problem, I have now is that my app store apps (that were already installed since my earlier fw) are crashing. Trying to figure out what can be done ..In the worst case I ‘ll re install the apps
Just deleted & re-installed one of the apps & now all the apps work fine.
Is this what I would use to “enable” my iPhone for use with other cell companies?
What you’re referring to is unlocking. Currently only 2G iPhones can be unlocked with this tool. If you’ve got a 3G, you won’t be able to use it with other cellular providers just yet.
I sucessfully went through the process with the new bootloader icon displayed but I still get a locked phone when I put in the new sim – do I need to run the process with itunes running and or the new sim in place?
Hi, just downloaded Quickpwn to unlock my iphone 2.1. Going through the process it asked for the bootloader v3.9 v4.6. What is and where on my computer can i find that information out . please.
Help appreciated
how can you use itunes 8.0 to upgrade your iphone to 2.1 if the new security measures refuse to detect a jailroken 2.0 iphone?
It’s great and it’s too easy …..i was very scared to do it then i do it and it was a succsess…
I tried many other progs… but this one is by far the easiest.
Will this 2.1 firmware upgrade also upgrade the baseband / modem.. so future unlock be impossible (difficult).
Help! I did everything it sayd above to unlock my iphone. However, it didn’t run in DOS mode but appeared to do everything it needed to.
I still can’t unlock my phone…
wonder why? I was going through the process and updated my Iphone via itunes like step (6) in the instructions. and when the Iphone restarted everything works normal exept didnt get cydia or installer, is it possible to add them???
Hi every one.
U can trust the steps mentioned above here.
for some reasons it did not show me the dos commands.
other than that . everything happens smoothly.
great tool.
my 3g not booting up after jailbreak tried 3 times and still nothing
my 2G iphone worked a treat!!
ive tryed quickpwn like a million times and it never works. Everything works up to puting it in to dfu mode then i hold the home button for like an hour and nothing happens. plzzz help me
Thanks!! worked a treat!!
Question for those who have done this successfully – When you’re supposed to hold the Home button for 5 seconds, then the Home and Power button for 10 seconds, are you holding the Home button the entire time? Or do you hold Home for 5 seconds, let go, then hold Home and Power for 10? Thanks.
Do not let go of the Home button, keep holding it down.
i tried this but my iphone 2g won’t boot again. PLEASE HELP. how can i fix this?
I have used QuickPwn to jail break my US 2g iphone with us sim card. I install my Canadian Rogers sim card with data plan and phone doesn’t recognize it. please help?
I have now downloaded QuickPwn 2.1 GUI from all four windows and every time i try open it a trojan is detected! I tried ignoring it and running the program and it then tells me the file path can not be found… WTF is up with these dwonloads no one else has mentioned this happening so im at a loss top work this out… i cant even attempt to go through these steps if the prgoram its self wont even work..any thoughts???
Dude,
This guide rocks !!!
Just had to Unlock my boss’s daughter’s iPhone v1 from America, all sa-weet..
Haha, reminded me of the days I was flashing my Moto e398 to the iTunes version LoL…
Thanks again guys,
DJ
hi there need quickPwn boot loader fro my 2g iphone plzzzzzzzz al_walhan143@yahoo.com
fukin sucks biggest piece of shit ive seen took my allday to restore my phone after this locked STAAAAAAAAAy away
Excellent, my hat off. the only modification needed was to make sure upgrade is to itunes 8.0 and that you must shift+click on restore to be able to select the 2.1 IPSW file, otherwise itunes will upgrade you to 2.2
this is a perfect application.works great.all u need to download the right application and everything goes fine.Finally thanx for this.